What is Mantle?
Mantle is a permanent record of your house. Every system, appliance, repair, warranty, and document lives in one place, organized by the house rather than scattered across drawers, email, and memory.
It answers the questions that come up years later. When was the water heater installed. Who serviced the furnace. Is the dishwasher still under warranty. What size filter does the return take.
What does Mantle replace?
The manila folder in the filing cabinet, the box of manuals in the basement, the photos buried in your camera roll, and the calendar reminders you set once and stopped following.
It replaces remembering. Most homeowners know their house well while they live in it and lose almost all of it the moment they need to prove something.
Do I need to be handy to get value from this?
No. Mantle is a record first. Writing down that the furnace was serviced on a date by a company is useful whether you turned the wrench or wrote the check.
If you do the work yourself, the walkthrough and care task features give you structure. If you hire everything out, Mantle becomes the file you hand a contractor so they stop asking questions you cannot answer.
Do I have to be the original owner?
No. Most homes have history before you arrived, and Mantle expects that. You enter what you know, mark what you are unsure about, and fill in the rest as you go.
A record that starts the day you move in is still worth far more than no record at all.
What should I set up first?
The four systems that cost the most to replace and matter most in an emergency: heating, cooling, water heater, and electrical panel. Get those in and you have covered the majority of what you will ever need to look up.
After that, add appliances as you happen to be standing in front of them. There is no need to do the whole house in one sitting.
How long does it take to set up a house?
The core systems take about twenty minutes. A full house, meaning every appliance, fixture, and finish, tends to happen over a few months as you move through rooms naturally.
That pace is intentional. A record built in one frantic evening is usually thin. A record built over a season is accurate.
What if I do not know my system details?
Look for the nameplate. Nearly every furnace, water heater, condenser, and major appliance carries a metal or printed plate with the make, model, and serial number. Photograph it, then type what it says into the fields.
On Premium, you skip the typing. You capture it, Mantle reads it, and the fields fill themselves.
If the plate is gone entirely, enter what you can see and leave the rest blank. Partial is fine. You can add to it the next time a technician is in the house.
Can I add more than one property?
Yes. Each property is its own record with its own systems, documents, and history. A rental, a second home, or a parent's house can all sit under one login.
Each property is billed separately, since each one is a separate record.
Can more than one person in my household use the account?
The record belongs to the account holder. If two people in a household both want access, share the login rather than creating a second account for the same address, so the history stays in one place.
What is a nameplate scan?
You photograph the data plate on a piece of equipment. Mantle reads the make, model, serial number, capacity, and date where they appear, and drops them into the right fields.
You capture it, Mantle reads it. That is the whole idea. Typing a fourteen character model number off a dusty plate in a crawlspace is the reason most home records never get built.
What can it actually read?
Furnace and air handler plates, condenser and heat pump plates, water heater labels, electrical panel directories, appliance rating plates, and most printed model and serial stickers.
It also handles the awkward ones reasonably well: plates behind a panel, plates at an angle, plates in poor light.
What if the plate is worn or painted over?
Capture what remains and enter the rest by hand. A serial number alone is often enough for a manufacturer to identify the unit later.
Other places to look: inside the access panel door, on the side of the blower compartment, on the original installation permit, or on an invoice from whoever installed it.
What if the plate is somewhere I cannot reach?
Ask on the next service call. Technicians read these plates for a living and are usually happy to photograph one while they are already up there.
How many scans do I get?
Scanning requires Premium. It is not part of the base plan. Premium includes twelve scans per month.
That works out to a full house over several months, which matches how people actually build a record. It is not a rush.
What if it reads something wrong?
Every field comes back editable before it is saved. Nothing is written to your record until you confirm it.
Check the serial number in particular. Zeros and letter O, ones and letter I, and fives and letter S are the usual culprits on worn plates.
Who is Zach?
Zach is the builder built into Mantle. He is the advisor you ask when something in the house does not seem right and you want an informed opinion before you make a call.
He is modeled on twenty five years of residential construction experience, from lead carpenter through project management on custom homes.
What does Zach know about my house?
What you have entered. Your systems, their ages, your service history, your findings, and your climate.
That context is why his answers are useful. A generic answer about furnace short cycling is worth very little. An answer that accounts for a nineteen year old unit that was last serviced two winters ago is worth a great deal.
Will he tell me to call a professional?
When that is the honest answer, yes. Gas, high voltage, structural work, and anything involving a permit belong with a licensed trade, and Zach will say so plainly rather than talk you into it.
For the large middle ground of ordinary homeowner work, he will walk you through it.
Is he ever wrong?
Yes. He is working from a description and photographs, not from standing in your basement. Treat his answers as an informed starting point, not a diagnosis.
If the answer involves gas, water under pressure, or anything load bearing, get eyes on it.
How many questions can I ask?
Zach requires Premium. It is not part of the base plan. Premium includes thirty advisor conversations per month, which is a generous ceiling for normal use and keeps the feature sustainable at this price.
What is a walkthrough?
A guided pass through the house, room by room and system by system, with prompts for the things worth looking at. Most people do one in spring and one in fall.
The walkthrough itself is part of the base plan. You look, you note, you photograph. On Premium you can also point at something you are unsure about and get an assessment of what you are looking at.
The value is not in finding disasters. It is in catching the small things early, while they are still cheap.
What happens when I flag something?
It becomes a finding: a dated, photographed note attached to the room or system where you found it. It stays open until you resolve it.
Your record shows how long it stayed open, so you can see at a glance what has been sitting for eight months.
What counts as a hazard?
Anything that could hurt someone or cause real damage if left alone. Scorched outlets, a missing handrail, standing water near a panel, a cracked heat exchanger, a disconnected dryer vent.
Hazards sit at the top of your record and stay there until they are closed out.
How do I close a finding out?
Mark it resolved and add a photo of the corrected condition. The finding stays in your history with both photos and both dates, so the record shows the problem, the fix, and how long it took.
That trail is what makes the record credible to a buyer, an inspector, or an insurer later.
Where do reminders come from?
From the equipment you have entered. A furnace generates filter changes and annual service. A water heater generates a flush. A dryer generates a vent cleaning.
The schedule follows manufacturer intervals, adjusted for the age of the unit.
Why does it ask for a photo when I finish a task?
Because a checkbox proves nothing and a photo proves everything. Six months on, a picture of the new filter with the date attached tells you what you actually did.
It also turns your maintenance history into something a buyer or an insurer will accept, rather than a list of claims.
What if I skip one?
Nothing punitive happens. It stays on the list and Mantle notes it was missed.
Mantle is built to encourage, not to nag. A record of what you have done is more motivating than a running tally of what you have not.
Does it account for my weather?
Yes. Entries are stamped with conditions at the time, and seasonal timing follows your local climate rather than a generic calendar.
A first freeze in Pennsylvania does not arrive when it arrives in Georgia, and outdoor tasks are scheduled accordingly.
What should I upload?
Anything you would panic about losing. Closing documents, permits, inspection reports, service invoices, warranty registrations, appliance manuals, insurance declarations, and photographs of work while the walls were open.
Photographs taken during a renovation, before drywall, are among the most valuable documents a house can have.
How do warranties work?
Each system carries its own warranty section with the term, start date, and coverage details. Mantle tracks the expiration and tells you before it lapses.
Most warranty claims fail on paperwork rather than merit. Keeping the registration and the install date together is most of the battle.
How does recall checking work?
Mantle checks your equipment against published safety recalls and notifies you when something in your house appears on a list.
Recall checking is included in every plan. Safety is not a paid upgrade. If something in your house has been recalled, you should hear about it regardless of what you are paying us.
This is also the single most valuable thing an accurate model and serial number buys you. Recall notices are mailed to the original purchaser, which is almost never the person living there when the notice goes out.
What if I lost the receipt?
Record what you know: approximate date, the company, and the cost if you remember it. Mark it as an estimate.
An imperfect entry is worth more than a blank one. You can often recover the original later from a credit card statement or by calling the contractor.
What is the Record tab?
The permanent side of Mantle. Three pinned views: Documents for everything you have uploaded, History for every dated entry in order, and Report for the printable summary.
The rest of the app is where you work. The Record is what you keep.
What is in the report?
A clean overview of the property: systems with ages and warranty status, maintenance history, findings raised and resolved, hazards, and documents on file.
It is written to be handed to someone else. A buyer, an agent, an adjuster, or a contractor bidding work.
Can I print or export it?
Yes. The report generates as a PDF you can print, email, or file. Your record is never locked inside Mantle.
Who else can see my record?
Nobody, unless you share it. There is no directory, no browsing, and no default visibility to anyone. Sharing is an action you take, one recipient at a time.
What transfers to the buyer?
The property record: systems, model and serial numbers, service history, warranty terms and expirations, permits, and documents that belong to the house.
It arrives as a working record they can continue, not a static file.
What stays private?
Your account, your advisor conversations, personal documents you uploaded, and anything you choose to withhold. You review the transfer item by item before it goes.
Nothing moves without your approval.
Does this actually help at resale?
A documented house negotiates better than an undocumented one. When an inspection turns up a question, a dated record with photographs answers it before it becomes a credit request.
It also signals something buyers respond to: this house was cared for by someone who paid attention.
What happens to my copy after I sell?
You keep it. Your copy becomes read only and stays available to you, which matters for taxes, insurance claims, and warranty work that outlives the sale.
What does Mantle cost?
Two plans, priced per property. Pick one.
Mantle is $21.99 a year, or $1.99 a month. It is the record, entered by you.
Mantle Premium is $69.99 a year, or $6.99 a month. It adds the features that read and advise.
What is the difference between Mantle and Premium?
Mantle is the record, entered by you. Systems, appliances, documents, warranties, care tasks and reminders, walkthroughs, findings, hazards, safety recall checking, full history, reports, and transfer at sale. You type the details and take the photographs yourself.
Mantle Premium includes all of that and adds the three features that read and advise on your behalf:
- Nameplate scanning, which fills in make, model, and serial from a photograph. Twelve scans a month.
- Photo diagnosis during a walkthrough, where you point at something and get an assessment
- Zach, the advisor who knows your house. Thirty conversations a month.
A Mantle subscriber has a complete home record. Premium is the labor saved building it and the second opinion when something looks wrong.
I was a beta tester. Am I being charged?
No. You are never charged unless you choose a plan and enter your payment details yourself.
The beta has ended. Your home record is still in your account and is read only until you choose a plan. Nameplate scanning, photo diagnosis, and Zach come with Mantle Premium.
What happens if I stop paying?
Your record goes read only. You can still view everything, print the report, and export your documents. What pauses is adding new entries, scanning, and asking Zach.
We do not delete your record if you stop paying. The record is the reason you trusted us with it. Come back in three years and it is still there.
Can I get my data out?
Yes, at any time, including after you cancel. The report exports as a PDF and your uploaded documents download as you filed them.
How do I upgrade or cancel?
Both from your account settings.
Moving from Mantle to Premium takes effect immediately and is prorated from the day you switch, so you pay only for the time remaining in your period.
Moving from Premium down to Mantle takes effect at the end of the period you have already paid for. Your record stays exactly as it is. Scanning and Zach switch off.
Cancelling also takes effect at the end of the paid period. No cancellation fees and no phone call required.
Who can see my record?
You. Access is enforced at the database level, not by the app, which means every request for your files is checked against your account before anything is returned.
Another Mantle customer cannot reach your photos or documents. Neither can someone without a login.
Do you sell my information?
No. Never to marketers, never to insurers, never to lead brokers, never to anyone.
Your home record is a detailed picture of your property and your habits, and there is a real market for that. We are not in it. Mantle is paid by the people who use it, which is the only arrangement where our interests and yours stay aligned.
Is my information shared with contractors?
Only when you grant permission, for the specific thing you are sharing. A contractor you send a system record to sees that record. They do not get your account, your other systems, or your documents.
You can revoke access at any time.
Where are my photos and documents stored?
In private storage scoped to your account. They are not reachable by a public link, and they are not indexed or searchable by anyone outside your login.
Is my information used to train anything?
No. Your photos, documents, and advisor conversations are not used as training material.
What happens if I delete my account?
Your identity is removed, along with your uploaded documents and your photographs.
The property record itself, meaning systems, service dates, and warranty terms, stays with the address so the next owner inherits the history rather than starting from nothing. That is the point of a record that belongs to the house.
If you would rather have everything erased, including the property record, write to us and we will purge it completely.
What do I get as a builder?
Every home you deliver arrives with a complete record already in it: systems, model and serial numbers, warranty terms, and the documents from the build.
You also get a warranty channel. When a homeowner raises an issue during the warranty period, it comes to you documented and photographed rather than as a voicemail describing a noise.
What can a builder see about the homeowner?
Warranty actions only. The items the homeowner has raised under warranty, with the photographs they attached to those items.
Not their other rooms, not their documents, not their advisor conversations, not their maintenance history. The homeowner's record stays theirs.
How long does builder access last?
Through the warranty period and beyond, until the homeowner turns it off. Warranty items are often still open past the first year, and cutting access on a calendar date would strand exactly the claims that need the most attention.
The homeowner controls it. They can revoke at any time, for any reason, and it takes effect immediately.
What do realtors and brokers gift?
A full year of Mantle Premium for a client, given at closing. Everything is included: nameplate scanning, photo diagnosis, and Zach.
The buyer starts with a record of the house from day one rather than a folder of paperwork, and they spend the year with the full product rather than a limited version of it.
Can a realtor see the client's record afterward?
No. Gifting a code grants nothing. Once it is redeemed, the record belongs entirely to the homeowner and the realtor sees only that the code was used.
That is deliberate. A closing gift should not come with a window into someone's house.
How do codes work?
You generate codes from your partner console and hand them to the client. Each one is single use and tied to one property. Your console shows which have been redeemed.
What happens when the gifted year ends?
The homeowner is offered the chance to continue on their own, at the same price anyone else pays. The partner discount is what the partner paid. It is not a rate the homeowner inherits.
Premium continues at $6.99 a month, or they can move to Mantle at $1.99 a month.
If they decline, the record goes read only and stays intact. Nothing is deleted. They keep everything built during the gifted year, which is usually the year that mattered most.
What does the partner program cost?
Each credit sets up one home with a full year of Mantle Premium, starting the day the owner opens it. After that, the owner can keep Premium for $6.99 a month, and the record stays either way.
- Realtors, mortgage brokers, insurance agents, and estate managers: $39 for one, $175 for 5, $320 for 10, or $725 for 25
- Builders: $149 for one home, $990 for 10, $2,225 for 25, or $3,950 for 50
Credits are bought outright rather than subscribed to, and they never expire. They are not refundable once purchased, whether or not the client redeems them.
Write to care@mantleproperties.com to get started or to discuss volume.
Still Looking
If the answer is not here, write to care@mantleproperties.com. A person reads it.
Builders, realtors, and brokers: write to the same address and we will send partner pricing for your volume.