Mantle Guides · Safety

Where Do Smoke and Carbon Monoxide Detectors Go, and When to Replace Them?

Where they go, when they expire, and how to stop the 3 a.m. chirp before it wins another round.

By Zach Reshetar, 25 years in residential construction · November 4, 2026

Put a smoke alarm inside every bedroom, outside each sleeping area, and on every level of the house, including the basement. Put a carbon monoxide alarm on every level and outside each sleeping area, within about 10 feet of the bedroom doors. Test both monthly. Replace smoke alarms every 10 years and CO alarms every 5 to 7 years, or by the date the manufacturer prints on the back.

There is a special kind of silence in a house at 3 a.m. It is the silence right before a smoke alarm with a dying battery lets out one single chirp. Then nothing. Then, just as you lie back down, another chirp. I have known grown men to stand on a kitchen chair in their pajamas, swatting at the ceiling like it owes them money.

I'm Zach. I've been building and fixing houses for 25 years, and I have pulled a lot of detectors off a lot of ceilings. Some were older than the people living under them. Some had no battery at all, because the battery had been "borrowed" for a TV remote years ago. So let's get yours sorted, calmly, in daylight, with both feet on a proper ladder. Panic is optional.

Where should smoke detectors go?

You want a smoke alarm in three kinds of places: inside every bedroom, in the hallway or area outside each group of bedrooms, and on every level of the house, basement included. If you have a finished attic you sleep in, that counts as a level.

Where should carbon monoxide detectors go?

Put a CO alarm on every level of the house and outside each sleeping area, within about 10 feet of the bedroom doors, or inside the bedrooms themselves. The point is to wake people up, so the bedrooms matter most.

Carbon monoxide has no smell, no color, and no manners. It comes from anything that burns fuel: a gas or oil furnace, a gas water heater, a gas stove, a fireplace, a wood stove, or a car running in an attached garage. If your house has any of those, you need CO alarms. If it is all electric with no attached garage, they are still cheap insurance, especially if you ever run a generator during an outage. I cover generator placement in what to do when the power goes out.

Follow the manufacturer's instructions for height. Some CO alarms go on the wall, some plug into an outlet, and combination smoke and CO units go on the ceiling like a regular smoke alarm.

How often should you test smoke and CO detectors?

Test every alarm once a month by pressing and holding the test button until it sounds. That's it. It takes about as long as microwaving leftovers, and it is a lot more important.

If a battery-powered alarm does not sound, put in a fresh battery and test again. If it still stays quiet, replace the whole alarm. Hardwired alarms usually have a backup battery too, and that battery needs changing, unless the unit has a sealed 10-year battery.

Pick one easy day each month for testing, like the day the mortgage or rent goes out. You are already in a responsible mood.

When should you replace smoke and carbon monoxide detectors?

Replace smoke alarms every 10 years. Replace CO alarms every 5 to 7 years, or sooner if the manufacturer says so. Some newer CO alarms are rated for 10 years, and the label will tell you.

The sensors wear out with age even when the test button still works, because the button checks the horn and the circuit more than the sensor itself. That's why age matters.

To check the age, take the alarm down and look at the back. There will be a manufacture date printed on it. Count from that date, not from the day you moved in. If there is no date at all, or the plastic has gone the color of weak tea, it is overdue.

TaskSmoke alarmCO alarm
Test with the buttonMonthlyMonthly
Change replaceable batteriesAt least once a yearAt least once a year
Replace the whole unitEvery 10 yearsEvery 5 to 7 years (or per the label)
Where it goesEvery bedroom, outside sleeping areas, every levelEvery level, outside sleeping areas

Why does my smoke detector keep chirping?

A single chirp every minute or so almost always means a low battery. Replace the battery, then press and hold the test button to reset it. If it keeps chirping with a fresh battery, check the date on the back. Many alarms chirp to tell you they have reached end of life, and no battery will fix that.

Fun fact from the field: the chirping always starts at night. I can't prove the alarms do it on purpose, but I have my suspicions.

What should you do if the CO alarm goes off?

Treat it as real. Get everyone, pets included, outside into fresh air right away, then call 911 or your fire department from outside. Do not go back in until the responders say it is safe.

Once things are clear, have a licensed HVAC or gas professional inspect your furnace, water heater, and other fuel-burning appliances before you use them again. A CO alarm going off is not a DIY puzzle. If you ever smell gas, which has that rotten egg odor, leave the house and call your gas utility from outside.

Do I need to hire an electrician for hardwired detectors?

Swapping a hardwired alarm for a compatible model with the same plug-in connector is a job many homeowners handle, with the breaker turned off first. Adding new hardwired alarms, running new wiring, or working inside the electrical panel is a job for a licensed electrician. If anything about the wiring looks scorched, loose, or confusing, stop and call one.

What does Pennsylvania require?

Pennsylvania's Carbon Monoxide Alarm Standards Act requires sellers of residential buildings to disclose information about carbon monoxide detectors on the property disclosure statement. Landlords of multifamily buildings with fuel-burning appliances, fireplaces, or attached garages have to provide CO alarms. Some Bucks County townships also have their own resale inspection rules for smoke and CO alarms, so check with your township before you list a house.

A quick checklist for this weekend

  1. Walk the house and count: every bedroom, every hallway outside bedrooms, every level. Note any gaps.
  2. Take down each alarm and read the date on the back.
  3. Replace any smoke alarm 10 years old or more, and any CO alarm past its label date.
  4. Change replaceable batteries.
  5. Press and hold every test button, and let everyone in the house hear what the alarm sounds like.
  6. Write down the install dates somewhere you will actually find them again.

Then put the ladder away and enjoy a full night's sleep with zero chirps. You earned it.

Common questions

How do I know how old my smoke detector is?

Take it down and look at the back. Manufacturers print a date of manufacture there. Replace a smoke alarm 10 years after that date, even if it still beeps when you test it.

Can I use a combination smoke and carbon monoxide detector?

Yes. Combination units detect both and can replace separate alarms, as long as you still have coverage in every required location. Follow the replacement date on the label, since the CO sensor may expire sooner than a standalone smoke alarm would.

Should there be a carbon monoxide detector in the basement?

Yes, put a CO alarm on every level, including the basement, especially if your furnace or water heater is down there. The most important ones are outside the sleeping areas, so the alarm wakes people up.

Never guess an alarm date again

Log the install date for every smoke and CO alarm in Mantle and get a reminder when each one is due for testing or replacement. Every home has a story. Mantle keeps it.

Start your home record